Manual:

Material: The LED lights are waterproof, sun-proof, cold-proof, drop-proof strips with chips, and can display seven kinds of lighting moods.

The LED is consisted of a 1.5M lamp strip plus 30cm of pure copper core wire. (Wire Length: 2M)

Battery Box: Requires 4 AA batteries with an ON/OFF switch sensor unit built-in dual induction receiving end with the function of sunproof and waterproof.

Specifications:

The hoop has a sensor on the basketball iron frame will automatically provide instant feedback, lighting up after automatically sensing that the basketball is scored. If the light is not on, it means that the basketball is not scored and the sensor didn't sense any motion.

The basketball hoop sensor has double induction on the receiving end with high sensitivity, no misjudgment in general.

Made of high quality environmental protection material that can be used both indoors and outdoors.

When the light flashes on, it can cultivate one's passion for basketball.

Light modes (7 different modes in cycle, 3 second lights):

  • Flashing Multi-Color
  • Pink
  • Flashing Pink
  • Orange
  • Flashing Orange
  • Green
  • Flashing Orange
  • Green
  • Flashing Green

Installation Instructions:

1. When you open the package, you will see the product as shown in the pictures. Take out all the components and carefully plan on where to place your LED Hoop on your basketball net.

2. Place 4 AA batteries in the battery box accordingly, press the ON/OFF switch and use your hand to cover over the sensor area. This will indicate that the product is functioning before installation. Press the ON/OFF switch to turn the battery box off before proceeding to the next step.

3. The flip battery case makes it easier to replace the battery. Based off the size and location of the basketball rack, you can choose the most suitable position for installation.

4. Take off the adhesive take on the sensor unit. Place it right under the basketball hoop, where the hoop is attached to the backboard (under the spring), so that it will sense the motion of the ball whenever you make a basket. You should keep this surface clean and press on for 30 seconds to ensure adhesive strength.

5. Do not attach the battery box until you have finished installing the next steps.

6. Unravel the LED lights and attach it around the ring of the basketball hoop using the 10 zip ties included in the box.

7. You can cut the end of the zip ties after you attach them for a better visual effect.

8. Re position the basketball net to the desired position first.

9. After re positioning the basketball net, you can then place the battery box anywhere depending on the length of the wire to avoid damage. If you attach it to the basketball pole, ensure that the wire is flush before attachment, and place it at the back of the pole to ensure protection against basketball shots. Hold for 30 seconds to apply.

10. Turn on, shoot and enjoy your new LED basketball hoop!

NOTE: All orders placed after 12/19/2019 will receive the v2 version as we have recently upgraded our model.

For the v1 version, the instructions are as followed:

1. When you open the package, you will see the product as shown in the pictures. Take out all the components and carefully plan on where to place your LED Hoop on your basketball net.

2. Press the ON/OFF switch and use your hand to cover over the sensor area. This will indicate that the product is functioning before installation. Press the ON/OFF switch to turn the battery box off before proceeding to the next step.

3. Based off the size and location of the basketball rack, you can choose the most suitable position for installation.

4. Take off the adhesive take on the battery sensor unit. Place it right under the basketball hoop, where the hoop is attached to the backboard (under the spring), so that it will sense the motion of the ball whenever you make a basket. You should keep this surface clean and press on for 30 seconds to ensure adhesive strength.

5. Do not attach the battery box until you have finished installing the next steps.

6. Unravel the LED lights and attach it around the ring of the basketball hoop using the zip ties included in the box.

7. You can cut the end of the zip ties after you attach them for a better visual effect.

8. Re position the basketball net to the desired position first.

9. Turn on, shoot and enjoy your new LED basketball hoop!